Walrus Audio Monumental Stereo Harmonic Tap Tremolo

Experience the Depth of Monumental Stereo Harmonic Tap Tremolo

Building off the rich, warm, pulsating modulation of the Monument, the Monumental Harmonic Stereo Tremolo is an analog, optical tremolo bringing new controls, features, and width to the Walrus Audio line. New features available in the Monumental include the ability to save presets, blend between standard and harmonic tremolo modes, access to new wave shape and tap division options, and most importantly, a pan control to set the stereo spread of the tremolo to the right and left channels.

Main Features:

True Stereo Input/Output: Enjoy a true stereo experience with separate left and right channels.
Preset Saving: Save and recall three on-board presets, as well as a “live” mode.
Full Expression Control: Gain full expression control over every parameter.
Additional Wave Shape and Tap Division: Access new wave shapes and tap division options.
Pan Control: Set the stereo spread of the tremolo to sweep from left to right.
S-B-H Control: Blend between standard and harmonic tremolo modes.
Ramp Control: Ramp up or down to achieve “Leslie” style ramp from your current rate.

Controls:

Pan: Control the stereo spread of the left and right channels. Counterclockwise is your standard tremolo sound, the left and right channels have the same LFO. Turning the control clockwise will offset the phase of the right LFO to introduce stereo spread. Fully clockwise is maximum panning with the right channel LFO being 180 degrees out of phase from the Left LFO.
S-B-H: Use this control to blend between standard and harmonic tremolo modes. In standard, all frequencies get affected at the same time. In harmonic, the high and low frequencies are offset from each other - When high is on, low is off and when high is off, low is on.
Preset: The Monumental has three onboard presets with an additional live mode. Each preset can save and recall every parameter available on the pedal. Press both the bypass switch and tap tempo switch simultaneously to cycle through the available presets (Red, Green, Blue, with White being “live”). When you are on a preset and you change a parameter, the bypass LED will change color to purple, indicating a change has been made. You can then turn the control and the bypass LED will return to the preset color when the control is at the saved position. Once you have determined what sound you want saved for the preset, hold down both footswitches to save the preset (the bypass LED will return to the preset color). Live mode will always return to the current knob positions on the face of the pedal.

Specifications:

Headroom: 1.7Vpp of headroom (Use 12V Supply for 2.6Vpp of Headroom) before the signal will start to distort.
Input Impedance: ~1M
Output Impedance: ~300Ohm
Stereo Unbalanced 1/4” Input (TS): Stereo Unbalanced 1/4” Output (TS)
Noise Level: -102.5dBu
THD %: 0.072% - 20dBu @ 1kHz
True Bypass: Yes
Frequency Response: 40Hz - 20kHz
Power Requirements: 9VDC - 12VDC, 100mA, Center Negative

Why Choose the Walrus Audio Monumental?

The Monumental is not just about rich, pulsating modulation; it delivers exceptional sound quality and versatility. Whether you're chasing traditional tremolo or unique waveforms, the Monumental adapts to your style with precision. Available at Edmond Music in Edmond, OK, part of the Oklahoma City metro area, this pedal is ready to transform your sound and style.