Product Overview
- Plug-and-play wireless system in a stompbox-size format for pedalboards
- Optimum wireless connection set automatically, with no complicated setup required
- Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 65-foot/20-meter range (line-of-sight propagation)*
- Built-in rechargeable battery in transmitter provides up to 12 hours of continuous playing time
- Plug the transmitter into the receiver’s docking port for charging and automatic wireless setup**
- Selectable cable tone simulation options: short, long, and bypass
- Receiver powered by optional PSA-S adaptor or two AA batteries
- With PSA-S adaptor power, the receiver’s DC output can distribute power to one or more pedals using an optional PCS-20A daisy-chain cable
- Spare WL-T Transmitter available separately
* The transmission range may vary due to local conditions.
** To charge the transmitter, the receiver must be powered via a BOSS PSA-S adaptor. It’s also possible to directly charge the transmitter with a standard USB adaptor (5 V/500 mA or higher).
- Specifications (RECEIVER)
- Wireless Format
- BOSS proprietary digital audio format
- Wireless carrier frequency
- 2.4 GHz
- Compatible Channels
- 14
(May vary due to local conditions) - Transmission Range
- 65 feet line-of-sight
(May vary due to local conditions) - Latency
- 2.3 ms
- Dynamic Range
- 110 dB or greater
- Frequency Response
- 20 Hz--20 kHz
- Nominal Input Level
- -10 dBu
- Input Impedance
- 1 M ohm
- Nominal Output Level
- -10 dBu
- Output Impedance
- 1 k ohm
- Recommended Load Impedance
- 10 k ohms or greater
- Controls
- CABLE TONE switch (OFF/SHORT/LONG)
- Indicators
- POWER
RECEIVE - Connectors
- INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jack - Power Supply
- Alkaline battery (AA, LR6) x 2
AC adaptor (sold separately) - Current Draw
- During wireless operation: 60 mA
While charging transmitter: 320 mA - Expected battery life under continuous use
- Alkaline battery (AA, LR6): Approximately 7 hours
* These figures will vary depending on the actual conditions of use. - Accessories
- Owner's Manual
Leaflet USING THE UNIT SAFELY
Transmitter
Rubber foot x 4
Alkaline battery (AA, LR6) x 2
An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T). - Options (sold separately)
- AC adaptor: PSA-S series
Parallel DC cord: PCS-20A (DC Plug x8) - Size and Weight (RECEIVER)
- Width
- 72 mm
2-7/8 inches - Depth
- 121 mm
4-13/16 inches - Height
- 56 mm
2-1/4 inches - Weight (including battery)
- 220 g
8 oz - Specifications (TRANSMITTER (WL-T))
- Nominal Input Level
- -10 dBu (1 M ohm)
- Indicator
- BATTERY
- Connectors
- Input plug: 1/4-inch TRS phone type
DC IN 5 V port: USB Micro-B type - Power Supply
- Rechargeable lithium-ion battery
Supplied from the DC IN 5 V port - Current Draw
- 350mA
- Battery charging time
- Approximately 3 hours
- Expected battery life under continuous use
- Approximately 12 hours
* These figures will vary depending on the actual conditions of use. - Size and Weight (TRANSMITTER (WL-T))
- Width
- 87 mm
3-7/16 inches - Depth
- 22 mm
7/8 inches - Height
- 36 mm
1-7/16 inches - Weight
- 43 g
2 oz - * 0 dBu = 0.775 Vrms
- *The specifications are subject to change without notice.
